16.,8.,144.,62.
1.2,-1,1.06,0
1.81,0.205,3,1
1.66,0.11,2,0
6.13,0.733,3,1
0,0.,0.3
105.1,1.1,0.75
55.,70.,1.
30,0.05

%-----------------
The first line:
     AP,ZP,AT,ZT
The second line:
     RP,IVIBROTP,RT,IVIBROTT
          (The radius parameter used in the coupling Hamiltonian)
           (IVIBROT: option for intrinsic degree of freedom 
                     = -1; no excitation (inert)
                     = 0 ; vibrational coupling
                     = 1 ; rotational coupling
                IVIBROTP: for projectile excitation
		IVIBROTT: for target excitation)
The third line:
     OMEGAT,BETAT,LAMBDAT,NPHONONT  (if IVIBROTT=0)
     E2T,BETA2T,BETA4T,NROTT        (if IVIBROTT=1)
          (Input for the target excitation)
	  (This line is irrelevant if IVIBROTT = -1.)
	  (NROT: the number of levels in the rotational band to be 
                 included (up to I^pi=2*NROTT+ states are included)
                 e.g. if NROTT=2, then 0+, 2+ and 4+ in the target 
                 are included.)
The 4th line: 
     OMEGAT2,BETAT2,LAMBDAT2,NPHONONT2
	  (Input for target phonon excitation; the second mode of 
           excitation. 
           For example, the first mode (LAMBDAT) may be a quadrupole 
           vib. and the second mode (LAMBDAT2) may be an octupole vib. 
           in the target nucleus.)
          (No second target phonon excitation if NPHONONT2=0
	           OMEGAT2, BETAT2, and LAMBDAT2 are irrelevant 
                   if NPHONONT2=0)
The 5th line:
     OMEGAP,BETAP,LAMBDAP,NPHONONP  (if IVIBROTP=0)
     E2P,BETA2P,BETA4P,NROTP        (if IVIBROTP=1)
          (Input for the projectile excitation)
	  (This line is irrelevant if IVIBROTP = -1.)
	  (NROT: the number of levels in the rotational band to be 
                 included (up to I^pi=2*NROTP+ states are included)
                 e.g. if NROTP=2, then 0+, 2+ and 4+ in the projectile 
                 are included.)
The 6th line:
     NTRANS,QTRANS,FTR
          (Input for pair transfer channel)
          (NTRANS is either 0 OR 1)
              No transfer ch. if NTRANS=0
        	       QTRANS and FTR are irrelevant if NTRANS=0)
          (Coupling form factor: 
               FTRANS(R)=FTR * d VN/ dR)
The 7th line: 
     V0,R0,A0
	  (Potential parameters)
The 8th line:
     EMIN,EMAX,DE
The 9th line:
     RMAX,DR